I posted this method on the general discussion when I found it, but it was suggested that I put it on here so here it is. It was tried out and does work.
You need:
(1)Transparency paper
(2)Inkjet Printer
(3)Lolly Stick
Step 1: Insert the transparency into your inket printer, so that it prints on the SMOOTH side of the transparency.
Step 2: Open your favourite word processing or photo program and create the text/image you want to have as a rub on.
Step 3: Format your printer settings so that it is set to print on "plain paper", "best quality" and "mirror image" (the image needs to be reversed especially if you are printing text or it will appear backwards).
Step 4: Print your "rub-on"
Step 5: Let dry for about 3-5 minutes, careful not to touch it
Step 6: Place the transparency smooth side down onto your project exactly where you want the image/text to appear, holding firmly in place, and rub with a lolly stick just like you would any other rub on. Don't be afraid to push to hard, and make sure you rub the entire image.
Step 7: Carefully remove the transparency and let ink completey dry before touching
Step 8: Use a damp cloth or paper towel to clean off your transparency and get it ready for your next rub-on, you can re-use the transparency over and over
and over again.


